Toyota Matrix 2003 User Manual Download Page 228

Page: 228 / 321

’03 MATRIX_U (L/O 0201)

189

2003 MY COROLLA MATRIX_U (OM12767U)

NOTICE

Do not tow your vehicle from the
rear. This may cause serious damage

to your vehicle.

Your vehicle is designed primarily as a

passenger

−

carrying vehicle. Towing a

trailer will have an adverse effect on
handling, performance, braking, durability

and driving economy (fuel consumption,

etc.). Your safety and satisfaction depend
on the proper use of correct equipment

and cautious driving habits. For your

safety and the safety of others, you must
not overload your vehicle or trailer. Toyota

warranties do not apply to damage or

malfunction caused by towing a trailer for
commercial purposes. Ask your local

Toyota dealer for further details before

towing.

WEIGHT LIMITS
Before towing, make sure the total trail-
er weight, gross combination weight,

gross vehicle weight, gross axle weight

and trailer tongue load are all within
the limits.

The total trailer weight and tongue load
can be measured with platform scales

found at a highway weighing station, build-

ing supply company, trucking company,
junk yard, etc.

CAUTION

The total trailer weight (trailer
weight plus its cargo load) must

not exceed 680 kg (1500 lb.). Ex-

ceeding this weight is dangerous.

Trailer towing

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands