Toyota Matrix 2003 User Manual Download Page 63

Page: 63 / 321

’03 MATRIX_U (L/O 0201)

2003 MY COROLLA MATRIX_U (OM12767U)

CAUTION

Push and pull the child restraint sys-
tem in different directions to make

sure it is secure. Follow all the

installation instructions provided by
its manufacturer.

4. To remove the infant seat, press the

buckle

−

release button and allow the

belt to retract completely. The belt will

move freely again and be ready to

work for an adult or older child passen-
ger.

(B) CONVERTIBLE SEAT INSTALLATION
A convertible seat is used in forward

−

facing or rear

−

facing position depend-

ing on the child’s age and size. When
installing, follow the manufacturer’s in-

struction about the applicable child’s

age and size as well as directions for
installing the child restraint system.

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands