Toyota Matrix 2003 User Manual Download Page 162

Page: 162 / 321

’03 MATRIX_U (L/O 0201)

158

2003 MY COROLLA MATRIX_U (OM12767U)

To use the box, push the lid.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop,

always keep the auxiliary box closed

while driving.

To use the box, push the knob.

To remove the auxiliary box, open the box
and pull it up.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden

stop, always keep the auxiliary box

closed while driving.

Do not use this auxiliary box as an

ashtray.

To access the rear console box, pull up

the lock release lever while raising the
rear console box lid.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop,

always keep the console box closed

while driving.

Auxiliary box (type B)

Auxiliary box (type C)

Rear console box (type A)

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands