Toyota Matrix 2003 User Manual Download Page 178

Page: 178 / 321

’03 MATRIX_U (L/O 0201)

174

2003 MY COROLLA MATRIX_U (OM12767U)

Your engine is fitted with iridium

−

tipped

spark plugs.

NOTICE

Use only iridium

−

tipped spark plugs

and do not adjust gaps for your en-

gine performance and smooth drive-

ability.

The tandem master cylinder brake system

is a hydraulic system with two separate

sub

−

systems. If either sub

−

system should

fail, the other will still work. However, the

pedal will be harder to press, and your

stopping distance will be longer. Also, the
brake system warning light may come on.

CAUTION

Do not drive your vehicle with only a
single brake system. Have your

brakes fixed immediately.

BRAKE BOOSTER

The brake booster uses engine vacuum to

power

−

assist the brakes. If the engine

should quit while you are driving, you can

bring the vehicle to a stop with normal

pedal pressure. There is enough reserved
vacuum for one or two stops—but no

more!

CAUTION

Do not pump the brake pedal if the
engine stalls. Each push on the

pedal uses up your reserved vacu-

um.

Even if the power assist is com-

pletely lost, the brakes will still

work. But you will have to push the
pedal hard, much harder than nor-

mal. And your braking distance will

be longer.

ANTI

−

LOCK BRAKE SYSTEM

(with “ABS” warning light)
The anti

−

lock brake system is designed

to help prevent lock

−

up of the wheels

during a sudden braking or braking on

slippery road surfaces. This assists in

providing directional stability and steer-

ing performance of the vehicle under

these circumstances.

Iridium

−

tipped spark plugs

Brake system

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands