Toyota Matrix 2003 User Manual Download Page 56

Page: 56 / 321

’03 MATRIX_U (L/O 0201)

2003 MY COROLLA MATRIX_U (OM12767U)

Do not use seat accessories which
cover the parts where the side air-

bags inflate. Such accessories may

prevent the side airbags from acti-
vating correctly, causing death or

serious injury.

Do not modify or replace the seats
or upholstery of front seats with

side airbags. Such changes may

disable the system or cause the
side airbags to inflate accidentally,

resulting in death or serious injury.

Failure to follow these instructions

can result in death or serious injury.

Consult your Toyota dealer if you
consider modifications of this kind.

NOTICE

Do not perform any of the following
changes without consulting your

Toyota dealer. Such changes can

interfere with proper operation of the
SRS side airbag system in some

cases.

Installation of electronic devices
such as a mobile two

−

way radio,

cassette tape player or compact

disc player

Modification of the suspension sys-

tem

Modification of the side structure of

the passenger compartment

Repairs made on or near the con-

sole or front seat

This SRS side airbag system has a

service reminder indicator to inform the
driver of operating problems. If either of

the following conditions occurs, this

indicates a malfunction of the airbags.
Contact your Toyota dealer as soon as

possible to service the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or the light remains on.

The light comes on or flashes while

driving.

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands