Toyota Matrix 2003 User Manual Download Page 168

Page: 168 / 321

’03 MATRIX_U (L/O 0201)

164

2003 MY COROLLA MATRIX_U (OM12767U)

To use the luggage cover:

1. Attach the left side hooks of the lug-

gage cover to the left side upper
tie

−

down hooks.

2. Attach the right side hooks of the

luggage cover to the right side up-

per tie

−

down hooks.

3. Pull the belt ends of the right side

hooks to secure the luggage cover.

CAUTION

Do not place anything on the luggage
cover. Such items may be thrown

about and possibly injure people in

the vehicle during sudden braking or
an accident.

To remove the luggage cover, loosen

the right side belts of the hooks as
shown above. Then remove the hooks

from tie

−

down hooks.

When you remove the luggage cover, fold

up and store it in the luggage storage

box.

Luggage cover

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands