Toyota Matrix 2003 User Manual Download Page 155

Page: 155 / 321

’03 MATRIX_U (L/O 0201)

151

2003 MY COROLLA MATRIX_U (OM12767U)

PORTABLE ASHTRAY
The ashtray can be removed and used
outside the vehicle. To use the ashtray,

open the lid.

When finished with your cigarette, thor-

oughly extinguish it in the ashtray to pre-

vent other cigarette butts from catching
fire. After using the ashtray, push it back

in completely.
To remove the ashtray, pull it out from the

front cup holder.

CAUTION

To reduce the chance of injury in
case of an accident or sudden stop

while driving, always completely close

the ashtray after use.

Instrument panel

Rear console box

Power outlets (12 VDC)

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands