Toyota Matrix 2003 User Manual Download

Page: 135 / 321

’03 MATRIX_U (L/O 0201)

131

2003 MY COROLLA MATRIX_U (OM12767U)

Radio

Push the “RCL” button to change the dis-

play among frequency, program service
name, and program type while receiving

RDS stations. To change what is normally

shown on the display, push this button
until you see the display you want, then

push and hold this button until the display

flashes and you hear a beep.

Compact disc auto changer

Push the “RCL” button to see how long
the current track has been playing. To

change what is normally shown on the

display (track number or elapsed time),
push this button until you see the display

you want, then push and hold this button

until the display flashes and you hear a
beep.

RDM (Random)

There are two random features—you can

either listen to the tracks on all the com-
pact discs in the changer in random order,

or only listen to the tracks on a specific

compact disc in random order.
To randomly play the tracks on a disc:

Push and hold the “RDM” button until
“RANDOM ONE” appears on the display

and you hear a beep. The disc you are

listening to will play in random order. To
turn off the random feature, push this but-

ton again.
To randomly play all the tracks in the
changer:

Quickly push and release the “RDM” but-

ton. “RANDOM ALL” will appear on the
display and the auto changer will perform

all the tracks on all the discs in the
changer in random order. If you hear a

beep, the auto changer will perform all the

tracks on all the discs in the changer. To
turn off the random feature, push this but-

ton again.

RPT (Repeat)

There are two repeat features—You can

either replay a disc track or a whole com-
pact disc.
Repeating a track:
Quickly push and release the “

” but-

ton while the track is playing. “REPEAT

TRACK” will appear on the display. If you

push and hold the button, the auto chang-
er will repeat the whole disc. When the

track ends, it will automatically replay. To

turn off the repeat feature, push this but-
ton again.
Repeating a disc:
Push and hold the “

” button until

“REPEAT CD” appears on the display. The

auto changer will repeat all the tracks on

the disc you are listening to. When the
disc ends, the auto changer will automati-

cally go back to the top track of the disc

and replay. To turn off the repeat feature,
push this button again.

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands