Toyota Matrix 2003 User Manual Download Page 84

Page: 84 / 321

’03 MATRIX_U (L/O 0201)

2003 MY COROLLA MATRIX_U (OM12767U)

Full

intensity

position

INSTRUMENT PANEL LIGHT
To adjust the brightness of the instru-
ment panel lights, turn the dial.

Full intensity position: This position always
keeps the brightness of the instrument

panel lights at full intensity even when the

tail lights/headlights are turned on.
If you have to turn on the tail lights/head-

lights in daytime, or if the daytime running
light control sensor activates in circum-

stances such as shade, the brightness of

instrument cluster will be reduced. In this
case, set the dial to the full intensity posi-

tion.

Type A

Type B

Type C

To turn on the personal light, push the

switch. To turn the light off, push the

switch once again.

Personal lights

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands