Toyota COROLLA 2010 - Quick Reference Manual Download Page 64

Page: 64 / 470

1-3. Adjustable components (seats, mirrors, steering wheel)

■

Installing the head restraints

■

Adjusting the height of the head restraints

■

Adjusting the rear center seat head restraint

Always raise the head restraint one level from the stowed position when
using.

CAUTION

■

Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.

●

Use the head restraints designed for each respective seat.

●

Adjust the head restraints to the correct position at all times.

●

After adjusting the head restraints, push down on them and make sure
they are locked in position.

●

Do not drive with the head restraints removed.

Align the head restraint with the installa-
tion holes and push it down to the lock
position.

Press and hold the lock release button
when lowering the head restraint.

Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands