Toyota COROLLA 2010 - Quick Reference Manual Download Page 169

Page: 169 / 470

161

2-4. Using other driving systems

en drivin

■

Cruise control can be set when

●

Automatic transmission:
The shift lever is in D or 3 (standard type), or in D, 4 or 5 range of S
(multi-mode type).

●

Vehicle speed is above 25 mph (40 km/h).

■

Adjusting the speed setting

Increase speed

Decrease speed

Hold the lever until the desired
speed setting is obtained.

Fine adjustment of the set
speed (approximately 1.0 mph
[1.6 km/h]) can be made by
lightly pushing the lever up or
down and releasing it.

■

Canceling and resuming regular acceleration

Cancel

Pull the lever towards you to
cancel cruise control.

The speed setting is also can-
celed when the brakes are
applied or the clutch pedal
(manual transmission) is
depressed.

Resume

To resume cruise control and
return to the set speed, push
the lever up.

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands