Toyota COROLLA 2010 - Quick Reference Manual Download Page 222

Page: 222 / 470

214

3-2. Using the audio system

Random playback

■

Current CD

Press

(RAND).

Tracks are played in a random order until

is pressed once more.

■

All CDs (type A with a CD changer and type B)

Press and hold

(RAND) until you hear a beep.

Tracks on all loaded CDs are played in a random order until

pressed once more.

Switching the display

Press .

Each time

is pressed, the display changes in the order of Track

no./Elapsed time

→

CD title

→

Track name.

■

Display

Up to 12 characters can be displayed at a time.

If there are 13 characters or more, pressing and holding

for 1

second or more will display the remaining characters.
A maximum of 24 characters can be displayed.

is pressed for 1 second or more again or has not been pressed

for 6 seconds or more, the display will return to the first 12 characters.

Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.

■

Canceling random, repeat and scan playback

Press

(RAND),

(RPT) or

again.

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands