Toyota COROLLA 2010 - Quick Reference Manual Download Page 404

Page: 404 / 470

398

5-2. Steps to take in an emergency

Raise the vehicle until the tire is
slightly raised off the ground.

Remove all the wheel nuts and
the tire.

When resting the tire on the
ground, place the tire so that the
wheel design faces up to avoid
scratching the wheel surface.

Installing the tire

Remove any dirt or foreign mat-
ter from the wheel contact sur-
face.

If foreign matter is on the wheel
contact surface, the wheel nuts
may loosen while the vehicle is
in motion, and the tire may
come off the vehicle.

STEP

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands