Toyota COROLLA 2010 - Quick Reference Manual Download Page 221

Page: 221 / 470

213

3-2. Using the audio system

Inte
rior fe

atures

Fast-forwarding and reversing tracks

To fast-forward or reverse, press

(reverse) or

(fast-for-

ward).

Scanning tracks

Press .

The first ten seconds of each track will be played.

Press

again when the desired track is reached.

Selecting a CD (type A with a CD changer and type B)

■

To select a CD to play

To select the desired CD, press

(

∨

) or

(

∧

■

To scan loaded CDs

Press and hold

until you hear a beep.

The first ten seconds of the first track on each CD will be played.

Press

again when the desired CD is reached.

Repeat play

■

To repeat a track

Press

(RPT).

■

To repeat all of the tracks on a CD (type A with a CD changer
and type B)

Press and hold

(RPT) until you hear a beep.

STEP

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands