Toyota COROLLA 2010 - Quick Reference Manual Download Page 91

Page: 91 / 470

Before driving

1-7. Safety information

Correct driving posture

Drive in a good posture as follows:

Sit upright and well back in
the seat. (

→

P. 49)

Adjust the position of the
seat forward or backward to
ensure the pedals can be
reached and easily
depressed to the extent
required. (

→

P. 49)

Adjust the seatback so that
the controls are easily oper-
able.

Adjust the tilt and telescopic
positions of the steering
wheel downward so the air-
bag is facing your chest.
(

→

P. 64)

Lock the head restraint in
place with the center of the
head restraint closest to the
top of your ears. (

→

P. 54)

Wear the seat belt correctly.
(

→

P. 56)

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands