Toyota COROLLA 2010 - Quick Reference Manual Download Page 214

Page: 214 / 470

206

3-2. Using the audio system

■

Scanning all radio stations within range

Press

All stations with reception will be played for 5 seconds each.

When the desired station is reached, press

once

again.

Satellite Radio* (if equipped)

■

Receiving XM

Satellite Radio

Press .
The display changes as follows each time

pressed.
AM

→

SAT1

→

SAT2

→

SAT3

Turn

to select the desired channel from all categories

or press “

∧

” or “

∨

” on

to select the desired channel in

the current category.

■

Setting XM

Satellite Radio channel presets

Select the desired channel. Press and hold the button (from
to

) the channel is to be set to until you hear a beep.

■

Changing the channel category

Press “

∧

” or “

∨

” on

STEP

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands