Toyota COROLLA 2010 - Quick Reference Manual Download Page 65

Page: 65 / 470

1-3. Adjustable components (seats, mirrors, steering wheel)

Before driving

Seat belts

Make sure that all occupants are wearing their seat belts before driv-
ing the vehicle.

■

Correct use of the seat belts

●

Extend the shoulder belt so
that it comes fully over the
shoulder, but does not
come into contact with the
neck or slide off the shoul-
der.

●

Position the lap belt as low
as possible over the hips.

●

Adjust the position of the
seatback. Sit up straight
and well back in the seat.

●

Do not twist the seat belt.

■

Fastening and releasing the seat belt

Fastening the belt

Push the tab into the buckle
until a clicking sound is heard.

Releasing the belt

Press the release button.

Release button

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands