Toyota COROLLA 2010 - Quick Reference Manual Download Page 114

Page: 114 / 470

104

1-7. Safety information

Installing child restraints

Follow the child restraint system manufacturer's instructions. Firmly

secure child restraints to the rear seats using the LATCH anchors or

a seat belt. Attach the top tether strap when installing a child

restraint.

The lap/shoulder belt can be used if your child restraint system is

not compatible with the LATCH (Lower Anchors and Tethers for Chil-

dren) system.

Seat belts equipped with a
child restraint locking mecha-
nism (ALR/ELR belts except
driver’s seat belt) (

→

P. 56)

Child restraint LATCH anchors

LATCH anchors are provided
for the outside rear seats. (But-
tons displaying the location of
the anchors are attached to the
seats.)

Anchor bracket (for top tether
strap)

Anchor brackets are provided
for all rear seats.

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands