Toyota COROLLA 2010 - Quick Reference Manual Download Page 161

Page: 161 / 470

152

2-2. Instrument cluster

●

Average fuel consumption

●

Driving range

●

Average vehicle speed

●

Elapsed time

Displays the average fuel consumption since the
function was reset.

The function can be reset by pressing the display but-
ton for longer than one second when the average fuel
consumption is displayed.

Displays the estimated maximum distance that
can be driven with the quantity of fuel remaining.

• This distance is computed based on your average

fuel consumption. As a result, the actual distance
that can be driven may differ from that displayed.

• When only a small amount of fuel is added to the

tank, the display may not be updated.

Displays the average vehicle speed since the
engine was started or since the function was
reset.

The function can be reset by pressing the display but-
ton for longer than one second when the average
vehicle speed is displayed.

Displays the elapsed time since the engine was
started or since the function was reset.

The function can be reset by pressing the display but-
ton for longer than one second when the elapsed time
is displayed.

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands