Toyota COROLLA 2010 - Quick Reference Manual Download Page 142

Page: 142 / 470

133

2-1. Driving procedures

en drivin

NOTICE

■

To prevent battery discharge

Do not leave the key in the “ACC” or “ON” position for long periods if the
engine is not running.

■

When starting the engine

●

2.4 L 4-cylinder (2AZ-FE) engine: Do not crank for more than 30 seconds
at a time. This may overheat the starter and wiring systems.

●

Do not race a cold engine.

●

If the engine becomes difficult to start or stalls frequently, have the engine
checked immediately.

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands