Toyota COROLLA 2010 - Quick Reference Manual Download Page 178

Page: 178 / 470

169

2-5. Driving information

Wh
en drivin

Vehicle load limits

■

Total load capacity and seating capacity

These details are also described on the tire and loading information
label. (

→

P. 337)

CAUTION

■

Overloading the vehicle

Do not overload the vehicle.
It may not only cause damage to the tires, but also degrade steering and
braking ability, resulting in an accident.

Vehicle load limits include total load capacity, seating capacity,
towing capacity and cargo capacity.

■

Total load capacity: 825 lb. (370 kg)

Total load capacity means the combined weight of occupants, cargo
and luggage.

■

Seating capacity: 5 occupants (Front 2, Rear 3)

Seating capacity means the maximum number of occupants whose
estimated average weight is 150 lb. (68 kg) per person.

■

Towing capacity: 1500 lb. (680 kg)

■

Cargo capacity

Cargo capacity may increase or decrease depending on the weight
and the number of occupants.

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands