Toyota COROLLA 2010 - Quick Reference Manual Download Page 436

Page: 436 / 470

431

6-1. Specifications

Vehicl

e sp

ecification

Cooling system

Ignition system

Capacity
(reference)

1.8 L 4-cylinder (2ZR-FE) engine

5.8 qt. (5.5 L, 4.8 Imp. qt.)

2.4 L 4-cylinder (2AZ-FE) engine

6.0 qt. (5.7 L, 5.0 Imp. qt.)

Coolant type

Use either of the following.

• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-silicate,

non-amine, non-nitrite, and non-borate coolant with
long-life hybrid organic acid technology

Do not use plain water alone.

Spark plug

Make

Gap

1.8 L 4-cylinder (2ZR-FE) engine

DENSO SC20HR11

2.4 L 4-cylinder (2AZ-FE) engine

DENSO SK20R11
NGK IFR6A11

0.043 in. (1.1 mm)

NOTICE

■

Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust spark plug gap.

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands