Toyota COROLLA 2010 - Quick Reference Manual Download Page 163

Page: 163 / 470

154

2-3. Operating the lights and wipers

Headlight switch

Turning on the high beam headlights

With the headlights on, push
the lever forward to turn on the
high beams.

Pull the lever back to the center
position to turn the high beams
off.

Pull the lever toward you to
turn on the high beams.

Release the lever to turn them off.
You can flash the high beams
with the headlights on or off.

The daytime running
lights turn on.

The side marker,
parking, tail, license
plate, daytime run-
ning lights and instru-
ment panel lights turn
on.

The headlights and
all lights listed above
(except daytime run-
ning lights) turn on.

*: Vehicles with Optitron type

meters

U.S.A.* Canada*

Summary of Contents for COROLLA 2010 -























































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands

Toyota COROLLA 2010 -, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2010 -

Reviews:

Related manuals for COROLLA 2010 -

Brands by name

Popular brands