E6581531
E-44
5
[How to select parameters]
Select the desired parameters as parameters 1 to 32 (
H
~
H
). Note that parameters should be specified
by communication number. For communication numbers, refer to Table of parameters.
In the quick mode, only parameters registered as parameters 1 to 32 are displayed in order of registration.
By default, parameters are set as shown in the table below.
[Parameter setting]
Title Function Adjustment
range
Default
setting
H
Quick registration parameter 1
~
(
CW
)
H
Quick registration parameter 2
~
(
RV
)
H
Quick registration parameter 3
~
(
HJ
)
H
Quick registration parameter 4
~
(
CEE
)
H
Quick registration parameter 5
~
(
FGE
)
H
Quick registration parameter 6
~
(
VJT
)
H
Quick registration parameter 7
~
(
HO
)
H
~
H
Quick registration parameter 8
~
Quick registration parameter 31
~
H
Quick registration parameter 32
~
(
RUGN
)
Note: If any number other than communication numbers is specified, it is
regarded as
(no function assigned).
Continuous
: Disabled
Shortcut key function (
H
=
)
This function allows you to register, in a shortcut list, parameters whose settings need to be changed frequently so
that you can read them out easily in a single operation.
The shortcut is usable in the frequency monitor mode only.
[Operation]
Set the parameter
H
to
, read out the setting of the parameter you want to register, and press and hold
down the EASY key for 2 sec. or more. The registration of the parameter in a shortcut list has been completed.
To read out the parameter, just press the EASY key.
