4-40
700 Series
4.16 Fan
Removing the Fan
To remove the fan, follow the steps below and refer to Figure 4-36.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory module, optional PCMCIA card, FDD
or optional CD-ROM drive, HDD, upper cover and keyboard, speakers, keyboard
base and display assembly, infrared board, sound board, IPS board, power supply
board, bottom cover, and system board as described in Sections 4.2 through 4.15.
3.
Remove
two M2.5x4 screws
.
4.
Remove the
fan
.
Figure 4-36 Removing the fan
Installing the Fan
To install the fan, follow the steps below and refer to Figure 4-36.
1.
Seat the
fan
.
2.
Secure
two M2.5x4 screws
.
3.
Install the system board, bottom cover, power supply board, IPS board, sound
board, infrared board, speakers, keyboard base and display assembly, upper cover
and keyboard, HDD, FDD or optional CD-ROM drive, optional PCMCIA card,
optional memory module, and battery pack as described in Sections 4.15 back
through 4.2.
Summary of Contents for Tecra 700CS
