manualshive.com logo in svg

Toshiba Tecra 700CS, Maintenance Manual

Share
Download
Toshiba Tecra 700CS Maintenance Manual Download Page 122

3-68

700 Series

(f)

Panel Power On/Off

This option allows you to automatically turn your computer on or off by
opening or closing the display panel.  If this feature is enabled when the
computer is in Resume mode, the system is automatically powered off
when the display panel is closed and powered on when the panel is
opened.  This option does not appear when the computer is in boot
mode.

Enabled

Enables the feature.

Disabled

Disables the feature.  (Default)

NOTE: 

 Do not remove the AC adapter and battery pack at the

same time when you use this feature.  If you do so, data saved by
AutoResume will be lost.  You must also reset this option.

(g)

Keyboard

This option lets you change the keyboard layout and set the Fn key
equivalent when you are using an external keyboard.  Selecting this
option displays the following subwindow.

(1) Int. Keyboard layout

This option lets you select the arrangement of the 

Caps Lock,

Ctrl 

and 

Alt

 keys according to the following illustrations:

  Int. Keyboard key layout

=

Normal

  Ext. Keyboard "Fn" key equivalent

=

Disabled

KEYBOARD

Summary of Contents for Tecra 700CS



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands