manualshive.com logo in svg

Toshiba Smart Manager, Engineering Book

Share
Download
Toshiba Smart Manager Engineering Book Download Page 78

Smart Manager

Engineering Book

78

-EN

8-2-6. Other Settings

[1] Support Information Display

1

Click 

 to display the [Contact] 

screen.
The software version and support 
information is displayed on the screen.

[2] Alarm Reset

1

Place the cursor on the floor, tenant, area, or 
air conditioner in the tree format and right-
click.
The [Operation menu] appears.

2

Click Alarm Reset in the [Operation menu].
The error clear signal is sent to the air 
conditioner(s) selected and the error signal 
will be cleared.

[3] Filter Sign Reset

1

Place the cursor on the floor, tenant, area, or 
air conditioner in the tree format and right-
click.
The [Operation menu] appears.

2

Click Filter Sign Reset in the [Operation 
menu].
The filter sign clear signal is sent to the air 
conditioner(s) selected and the filter sign 
will be cleared.

1

1

2

1

2

Summary of Contents for Smart Manager











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands