manualshive.com logo in svg

Toshiba Smart Manager, Engineering Book

Share
Download
Toshiba Smart Manager Engineering Book Download Page 101

Smart Manager

Engineering Book

101

-EN

When the file has not been loaded

When you open the upload screen without loading the file using “Download” or “Folder”, follow the procedure below 
to upload the file:

Step 1 Click the [Browse] button of the upload folder, and select the destination folder to upload the setting file. 

The file stored in the selected folder appears as upload data in the comparison result list. Communication 
is established to the system to retrieve the current setting file. The retrieved file appears as downloaded 
data in the comparison result list.

Step 2 Click the [Browse] button of the backup folder, and select the destination folder to back up the current 

setting file into.

Step 3 Click the [Upload] button.

Fig.12 [Upload Setting] screen

* To restore data, select the backup folder selected when the file was uploaded, then perform uploading.

Step 1

Step 2

Step 3

Summary of Contents for Smart Manager











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands