manualshive.com logo in svg

Toshiba Smart Manager, Engineering Book

Share
Download
Toshiba Smart Manager Engineering Book Download Page 30

Smart Manager

Engineering Book

30

-EN

B Manual setting

Set central control addresses (group numbers) manually from the Smart Manager.

1

Press the 

 button and ZONE 

 button simultaneously for at least 4 seconds.

(CODE No. C1 flashes.)

2

Check CODE No. C1, and then press the 

 button.

3

Select the line on which the unit exists and the zone and group in which addresses are to be 
registered with the LINE button, ZONE 

 and 

 buttons, and GROUP 

 and 

 buttons.

• When a zone is selected, group numbers registered in the zone are displayed.
• Groups whose numbers are displayed are already registered.
• Even when addresses have been registered, the registration can be cancelled with the 

 button.

4

Select the unit to be registered in the group selected in step (3).

• Switch refrigeration system No.1 to 31 with the 

 button, and then switch indoor unit No.1 to 64 with the 

 button.

• When no system exists, indoor unit number is displayed as “- -”.
• System number 31 is for a local adapter and heat exchange ventilators. An indoor unit number is always 

displayed regardless of whether the unit exists or not.

5

Press the 

 button to register the setting or press the 

 button to cancel the setting.

6

To continue registration, repeat steps (3) to (5).

7

Press the 

 button to terminate the address setting.

C Automatic setting

Set central control addresses automatically from the Smart Manager.
(Central control addresses are set automatically in ascending order of unit number.)

1

Press the 

 button and ZONE 

 button simultaneously for at least 4 seconds.

(CODE No. C1 flashes.)

2

Press the SET TEMP. 

 or 

 button to change the CODE No. to C2.

3

Press the 

 button. (Central control addresses are automatically registered. This registration 

requires several minutes. 

 lights during this address setting.)

4

 goes out and the indication of C2 flashes, which shows completion of the automatic 

address registration.

5

Press the 

 button to exit the address setting mode.

Summary of Contents for Smart Manager











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands