Smart Manager
Engineering Book
61
-EN
8-1-3. Group operation
* Indications on the LCD of the Smart Manager remain unchanged even when operation is stopped.
Power on
Turn on the power of the remote controller.
(Buttons on the remote controller are disabled while
is displayed, but this is
not a fault.)
1 Line switching
Select line 1 with the
button.
2
ALL
/
ZONE
/
GROUP
Select
with the
button.
3 Group switching
Select group number 4 with the
GROUP
and
buttons.
(Group number 4 blinks like
.)
4
ON
Press the
ON
button to start operation.
5 Operation mode switching
Select
COOL
mode with the
button.
6 Air volume switching
Select
AUTO
air volume with the
button.
7 Temperature setting
Set temperature to 24 °C with the
SET TEMP.
and
buttons.
8 Swing/wind direction setting
(When no remote controller is
used)
Select a louver position or up/down swinging with the
button.
9 Central/individual
(Only in the central control
mode)
Change the setting with the
button.
Individual:
Controls with the remote controller are possible.
CENTRAL 1
:Disables operation start/stop using the remote controller.
CENTRAL 2
:Disables operation start/stop, operation mode switching, and temperature
setting using the remote controller.
CENTRAL 3
:Disables operation mode switching and temperature setting using the
remote controller.
CENTRAL 4
:Disables operation mode switching using the remote controller.
“
CENTRAL
” is displayed for central or individual control other than above.
STOP
Press the OFF button to stop operation.
(Example) Operating LINE 1, GROUP 4 (Cooling at 24°C, air volume: AUTO)
2
1
3
4
6
5
7
8
STOP
9
24°C
Summary of Contents for Smart Manager
Page 93: ...Smart Manager Engineering Book 93 EN ...
Page 106: ......
