Toshiba e-STUDIO163, Service Handbook

Page: 71 / 237

© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO163/166/203/206
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 51
2
642 User
interface
Default setting of Sorter
Mode
PPC 1
<0,1>
M 0: SORT
1: GROUP
1
655 General Reset the 05/08 codes - - - Returns the set value
for the 05/08 code to its
default value.
However, various
counter values of the 08
codes are not reset.
-
672 General Initialization of Access
code
- - SYS Initializing of the Access
code
* Key in the code and
press the [START]
button to perform
the initialization.
3
695 General Toner remaining check
function (supports embed-
ded IC chip)
ALL e-
STUDIO
163/203:
JPN: 1
CND: 0
Other: 1
<0~1>
e-
STUDIO
166/206:
JPN: 1
NAD/
ASU/
SAD/
ASD/
ARD/
SYD/
CND: 2
Other: 1
<0~2>
SYS Checks whether the
toner cartridge is
inserted or not.
0: Check function dis-
abled (08-971 is
automatically
changed to “3:
Toner near-empty
detection disabled”.)
1: Check function
enabled (08-971 is
automatically
changed to “1:
Toner near empty
threshold value
(standard)”.)
2: Check function and
print restriction
enabled (08-971 is
automatically
changed to “1:
Toner near empty
threshold value
(standard)”.)
1
698 Paper
feeding
Limit function for the num-
ber of paper exit
ALL 1
<0-1>
M Sets if the MFP controls
the paper exit full status
or not. If "0" is set to 08-
698, the MFP will not go
into the paper exit full
status.
0: OFF
1: ON
Number set at 08-699
will be set as the limit
number of paper exit.
1
699 Paper
feeding
Limit number setting for
paper exit
ALL 250
<1-999>
M When the counter
reaches the value spec-
ified, the MFP goes into
the paper exit full sta-
tus. Sets the limit num-
ber of paper exit for 08-
698.
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure