manualshive.com logo in svg

Toshiba e-studio 167, Operator'S Manual For Copying Functions, Page: 98 / 220

Share
Download
Toshiba e-studio 167 Operator'S Manual For Copying Functions Download Page 98

4 ADVANCED COPYING FUNCTIONS

96    Copying on Both Sides - DUPLEX -

7

Place the original, and then select other copy modes as required. 
Then press the [START] button.

Do not place heavy objects (4 kg or more) and do not press on it with force.

Breaking the glass could injure you.

Scanning starts.

8

Open the next page and place the original, select “YES”, and then 
press the [ENTER] button. Repeat this procedure until the last page 
to be copied is left.

You can press the [START] button instead of selecting “YES”.

When copying the last page

If the last page is 1-sided, select “YES (SINGLE)” and then press the [ENTER] button. If 
it is 2-sided, select “YES” and then press the [ENTER] button.

When all the originals have been scanned

Select “NO” and then press the [ENTER] button.

Next original?

YES

YES(SINGLE)

Summary of Contents for e-studio 167





























































































































































































































Reviews:

No comments