manualshive.com logo in svg

Toshiba e-studio 167, Operator'S Manual For Copying Functions, Page: 47 / 220

Share
Download
Toshiba e-studio 167 Operator'S Manual For Copying Functions Download Page 47

Preparation 2 - Placing Copy Paper    45

3

Push the right side of the side guide lock to unlock it.

4

While pushing the green knob of the side guides, adjust the side 
guides at the position of the desired paper size.

Adjust the side guides with both hands.

5

Place paper in the drawer.

y

The maximum number of sheets that can be placed at one time is 550 (80 g/m

2

). Be 

sure that the stack height of paper is not higher than the line indicated at the inner 
side of the guide.

 

 P.38 “Acceptable media types”

y

Fan the paper well before placing it in the drawer, otherwise multiple feeding could 
occur. Be careful that the paper does not cut your fingers.

y

Place the paper face up. You may tell its “face” by the note on its wrapping paper.

Summary of Contents for e-studio 167





























































































































































































































Reviews:

No comments