manualshive.com logo in svg

Toshiba e-studio 167, Operator'S Manual For Copying Functions, Page: 122 / 220

Share
Download
Toshiba e-studio 167 Operator'S Manual For Copying Functions Download Page 122

5 CHANGING EQUIPMENT’S SETTINGS

120    Date and Time

5

Key in the date.

e.g.) April 10, 2006: [2] [0] [0] [6] [0] [4] [1] [0]

6

Select the date of the week with the 

 and 

 buttons, and then 

press the 

 button.

7

Key in the time.

e.g.) 10:30 am: [1] [0] [3] [0]

If 12-hour display is set, press the 

 or 

 button to switch the a.m./p.m.

8

After all the items have finished being entered, press the [ENTER] 
button.

The time is set and the screen returns to the menu in step 4.

9

Press the [USER FUNCTIONS] button or 

 (copy mode) button.

The screen returns to the “copy mode” main screen.

SETTING

2006-04-1

0

 SUN    09:45 AM

YYYY-MM-DD DAY    HH:MM

SETTING

2006-04-10 

MON

    09:45 AM

YYYY-MM-DD DAY    HH:MM

SETTING

2006-04-10 MON    10:3

0 

AM

YYYY-MM-DD DAY    HH:MM

Summary of Contents for e-studio 167





























































































































































































































Reviews:

No comments