manualshive.com logo in svg

Toshiba e-studio 167, Operator'S Manual For Copying Functions, Page: 167 / 220

Share
Download
Toshiba e-studio 167 Operator'S Manual For Copying Functions Download Page 167

Various List Printing    165

Various List Printing

This section describes how to print the list in order to check the following information.

DEPARTMENT CODE:

 

The department codes which have been registered and the counter 
values of each department code

FUNCTION: 

The contents of the settings in this equipment

SUPPLY NOTICE:

 

Supply information of the equipment

ITU MAILBOX: 

The box numbers and attributes of the mail boxes which have been 
registered, and the registration date/time of the originals

CONFIGURATION PAGE: 

The setting status of the Network Printer Kit (optional)

NIC STATUS PAGE: 

The NIC (Network Interface Card) information of the Network 
Printer Kit (optional)

1

Press the [USER FUNCTIONS] button.

The “user functions mode” main screen is displayed.

2

Select “LISTS” with 

 and 

 buttons, and then press the 

[ENTER] button.

USER FUNCTIONS

1216

01.DEFAULT SETTINGS

02.LISTS

03.INITIAL SETUP

Summary of Contents for e-studio 167





























































































































































































































Reviews:

No comments