manualshive.com logo in svg

Toshiba e-studio 167, Operator'S Manual For Copying Functions, Page: 136 / 220

Share
Download
Toshiba e-studio 167 Operator'S Manual For Copying Functions Download Page 136

5 CHANGING EQUIPMENT’S SETTINGS

134    Weekly Timer Setting

8

Key in the time to turn the power OFF, and then press the [ENTER] 
button.

The time to turn the power ON/OFF is set and the screen returns to the menu in step 6.

9

Set the time to turn the power ON/OFF for each day of the week by 
following steps 6 to 8.

10

When all the setting is completed, select “COMPLETE”, and then 
press the [ENTER] button.

The weekly timer is set and the screen returns to the menu in step 4.

11

Press the [USER FUNCTIONS] button or 

 (copy mode) button.

The screen returns to the “copy mode” main screen.

Clearing the weekly timer

Select “OFF” in step 5.

The time settings remain even if the weekly timer is cleared. They become valid when the 
weekly timer is set to ON again.

SUNDAY
OFF TIME:

HH:MM
07:30 

PM

WEEKLY TIMER
6.FRIDAY
7.SATURDAY

8.COMPLETE

Summary of Contents for e-studio 167





























































































































































































































Reviews:

No comments