manualshive.com logo in svg

Toshiba e-studio 167, Operator'S Manual For Copying Functions, Page: 75 / 220

Share
Download
Toshiba e-studio 167 Operator'S Manual For Copying Functions Download Page 75

Zooming In/Out Copy Image    73

1

Place paper in the drawer.

2

Press the [COPY] button several times until the lamp of the desired 
paper size is lit.

e.g.) Selecting A4 size

You can select the desired paper size with the [DRAWER] button in the same procedure.

3

Press the APS/AMS selecting button until the AMS lamp is lit.

The reproduction ratio on the “copy mode” main screen will be changed to “AMS”.

4

Place the original.

5

Select the other copy modes as required, and then press the 
[START] button.

Copying is performed with the most suitable reproduction ratio for the specified paper 
size.

When “Change direction ORG” appears

The direction of the original placed is not correct. Press the [ENTER] button to exit the original. 
Then place it by rotating 90 degrees and resume copying.

Summary of Contents for e-studio 167





























































































































































































































Reviews:

No comments