Toshiba e-studio 160, Operator'S Manual For Copying Functions

Page: 43 / 182

3-7
1
2
3
4
5
6
7
9
10
11
12
8
Bypass Copying by Specifying the Copy Size
By specifying the copy size in bypass copying, you can select the following copying modes:
• Duplex copying • Dual-page copying • Sort copying • Offset
• Magazine sort • 2-in-1/4-in-1 • Alternation
1 Place sheets of copy paper on the stack feed
bypass.
2 Select the desired copy size.
• Use the or key to select the copy size.
Make sure that the desired copy size and its direction
are displayed. Then press the key.
3 Select the desired duplex printing mode, dual-page
copying, sort copying, offset, magazine sort, 2-in-
1/4-in-1 or alternation as well as the image density
and the reproduction ratio.
Please note that the reversing automatic document
feeder (optional) and the automatic duplexing unit
(optional) are required for duplex printing and
magazine sort.
4
Key in the desired copy quantity using the numeric
keys.
5 Place the original(s) on the original feed tray or on
the glass.
(Setting Original. Page 2-4)
6
Press the key.
Select paper size
01.LD
02.COMP
03.LG
04.LT
05.LT-R
06.ST-R
07.A4
08.A4-R