manualshive.com logo in svg

Toshiba e-studio 160, Operator'S Manual For Copying Functions, Page: 91 / 182

Share
Download
Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 91

5-9

1

2

3

4

5

6

7

9

10

11

12

8

Canceling Weekly Timer

1

Press the 

 key to enter the program menu.

2

Select “01.DEFAULT SETTINGS” and press the 

key.

PROGRAM

01.DEFAULT SETTINGS

02.LISTS

03.INITIAL SETUP

3

Select “01. MACHINE DEFAULTS” and press the  

key.

DEFAULT SETTINGS

01.MACHINE DEFAULTS

02.COPY SETUP

03.FAX SETUP

4

Select “04. WEEKLY TIMER” and press the 

 key.

5

Select “1.OFF,” and press the 

 key.

• When the Weekly Timer is turned off, any existing times

settings are still stored.  When the weekly timer is resumed,
the settings made for the Weekly Timer are available.

WEEKLY TIMER

1.OFF

2.ON

6

Press the 

 key to return to the initial screen for

copying.

Tip

"03. FAX SETUP" can be selected only when the FAX option
is installed.

Tip

"02. WALKUP SCREEN" can be selected only when the FAX
option is installed.

MACHINE DEFAULTS

02.WALKUP SCREEN

03.TIMERS

04.WEEKLY TIMER

Summary of Contents for e-studio 160























































































































































































Reviews:

No comments