Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 31

Page: 31 / 182

2-3

Set the desired copy modes.

• The automatic paper selection (APS) mode, automatic

image density mode and copying of one original are the
default settings.

Press the

key.

• The message “COPYING” appears. The digital multi

function system starts copying. After completion of the
copying, the message “READY” appears again.

• For the e-STUDIO160, when an original is scanned from

the glass, a message appears prompting you to specify

the size of the original that you would like to copy.

Use the

key to specify the size of the

original. Then press the

key. The machine will start

copying.

COPYING

PAPER

LT-R

:AUTO

FINISHING :SORT

:100%

Select original size

LT-R

ST-R

Summary of Contents for e-studio 160






















































































































































































Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands

Toshiba e-studio 160, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands