Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 77

Page: 77 / 182

4-25

9. JOB BUILD

This function allows up to five sets of originals to be scanned and stored separately and then to be
copied and output all at once.

Press the

key on the control panel while in the

initial screen for copying. The "EDIT MENU" screen

appears.

Press the

key to display the "JOB BUILD."

Then press the

key.

Press the

key to display the "ON." Then press

the

key.

The "JOB BUILD: ON" screen appears. Press the

key to return to the initial screen for copying.

Select the desired paper cassette, image density,

reproduction ratio and copy quantity.

Place the original on the glass or feed tray and press

the

key.

After the original is scanned, the screen on the right

appears.

• When scanning the next original without changing any

settings, place it on the glass or feed tray and select "Scan

next page." Then press the

key.

• In scanning the next original, if the scan density and Edge

Erase settings are changed, select "Change current settings"

to change the settings. Then press the

key.

• When all originals have been scanned, select "End job build"

to start copying automatically. Then press the

key.

JOB BUILD

Scan next page

End job build

Change current setting

Scanning in memory

Scanning Page

:XXX

READY

ANNOTATION

:OFF

EDITING

:OFF

JOB BUILD

:ON

JOB BUILD

OFF

READY

ANNOTATION

:OFF

EDITING

:OFF

JOB BUILD

:OFF

Note

To select the paper cassette, press the

key, select AMS

and then select the desired paper cassette.

Summary of Contents for e-studio 160






















































































































































































Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands

Toshiba e-studio 160, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands