Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 48

Page: 48 / 182

3-12

BASIC MENU

X-Y Zoom

This function allows you to alter the reproduction ratio in the X and Y directions of your copies.

Press the

key on the control panel.

Press the

key to display “XY ZOOM.” Then

press the

key.

Specify the X and Y reproduction ratios.

• Select the X or Y direction using the

key and specify

the reproduction ratio using the

key. Then

press the

key to accept the reproduction ratio.

• When the original is scanned on the original glass, the

reproduction ratio can be specified to 50 % to 200 % for the
e-STUDIO160, and 25 % to 400 % for the e-STUDIO200/
250.

• When the original is scanned in the automatic document

feeder (optional) or reversing automatic document feeder
(optional), the reproduction ratio of 50 % to 200 % can be
specified.

“Xxxx-Yxxx%” appears next to zoom on the display.

Select the desired paper cassette, image density and

copy quantity.

Place the original on the glass or the feed tray and

press the

key.

ZOOM

XY ZOOM:

200%

X 100 % - Y 99 %

50%

READY

PAPER

:AUTO

FINISHING :SORT ZOOM :X100-Y99%

EDIT

100%

200%

100%

200%

2. REDUCTION AND ENLARGEMENT COPYING (Cont.)

READY

ZOOM:

REDUCE/ENLARGE

ZOOM UP/DOWN

XY ZOOM

Summary of Contents for e-studio 160






















































































































































































Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands

Toshiba e-studio 160, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands