Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 61

Page: 61 / 182

4-9

Note

This copying mode requires the reversing automatic document feeder (optional) to be installed.

Press the

key on the control panel while in the

initial screen for copying. The “EDIT MENU” screen

appears.

Confirm that “DUPLEX” is highlighted on the screen.

Then press the

key.

Select “2 > 1” by pressing the

key.

Then press the

key. Press the

key to return

to the initial screen for copying.

Select the desired paper cassette, reproduction

ratio, image density and copy quantity.

• The automatic paper selection mode is selected as the

default mode.

Place the originals on the feed tray.

Press the

key.

READY

DUPLEX

:1 > 1

DUAL TYPE

:OFF

IMAGE SHIFT

:OFF

2-Sided Originals > 1-Sided Copies

How to place originals

Always set originals vertically. If originals are set horizontally,
the copies will be output upside down alternately.

DUPLEX

Original > Copy

2 > 2

2 > 1

Summary of Contents for e-studio 160






















































































































































































Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands

Toshiba e-studio 160, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands