Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 36

Page: 36 / 182

2-8

HOW TO MAKE COPIES

3. INTERRUPT COPYING

The interrupt copy is a convenient feature that allows the user to pause a job that is currently in progress.

Press the

key.

• This message appears:

Job interrupted

• The

key illuminates during the INTERRUPT copying.

Note

One interrupt copy can be made from multiple originals by

placing them on the glass one at a time.

Place the original.

• If the previous original remains on the glass, open the original

cover or automatic document feeder (optional) or the
reversing automatic document feeder (optional) and replace
it with the original to be interrupt-copied.

Press the

key.

• Repeat steps 2 to 4 if you need to interrupt copying again.

After interrupt copying is finished, press the

key again.

• When the following is shown on the Message Display, press

the

key and perform the interrupted jobs.

Ready to resume job.

Ready to resume job

PAPER

:APS

:AUTO

FINISHING :SORT

ZOOM :100%

EDIT

Summary of Contents for e-studio 160






















































































































































































Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands

Toshiba e-studio 160, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands