Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 157

Page: 157 / 182

8-7

5. LED TEST

The LED test checks LED operation by lighting all the LEDs on the control panel.

Press the

key to enter the program menu.

Select “05.TEST MODE” and press the

key.

Select “02.INDIVIDUAL TEST” and press the

key.

Select “03.LED TEST” and press the

key.

Visually check that all the LEDs are on. After

checking, press

key.

If all the LEDs turned on, select the “1.OK” and press

the

key.

If even one LED did not light, select the “2.NG” and

press the

key.

• The results of the LED test can be confirmed with the self

test report.

Page 8-12

• If the result of the LED test is judged to be NG, call your

service representative.

PROGRAM

01.DEFAULT SETTINGS

02.LISTS

03.INITIAL SETUP

04.MENU LIST

05.TEST MODE

TEST MODE

01.AUTO TEST

02.INDIVIDUAL TEST

03.TEST RESULT LIST

INDIVIDUAL TEST

01.ADF TEST

02.KEY TEST

03.LED TEST

04.LCD TEST

05.SPEAKER TEST

06.SWITCH TEST

07.TEST PRINT

LED TEST

CHECK IF ALL LEDS ARE ON.

PRESS STOP TO COMPLETE.

LED TEST

ENTER TEST RESULT

1.OK

2.NG

Summary of Contents for e-studio 160






















































































































































































Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands

Toshiba e-studio 160, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands