Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 24

Page: 24 / 182

1-10

BEFORE MAKING COPIES

3. PAPER (Cont.)

Turning ON the Power Switch / Auto Job Start

Turning On the Power Switch

The “Ready” message appears.

• This message indicates that the digital multi function system

is ready for operation.

Auto Job Start

READY

PAPER

:APS

:AUTO

FINISHING :NONSORT ZOOM :100%

EDIT

While the digital multi function system is warming up, place the

original on the glass, select the desired copy modes and press

the

key.

Wait warming up:Auto Start

When the machine reaches its proper operating temperature,
copying will automatically start.

Tip

Even after you have pressed the

key, you can change

the copy modes if copying has not yet started. To cancel the

auto job start mode, press the

key.

Open the power switch cover and turn ON the

switch.

• This message appears on the message display panel of

the basic screen :

Please wait

Wait warming up

Summary of Contents for e-studio 160






















































































































































































Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands

Toshiba e-studio 160, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands