Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 78

Page: 78 / 182

4-26

EDIT MENU

Press the

key on the control panel while in

the initial screen for copying.

Press the

key to display the “MIX SIZE”.

Then press the

key.

Press the

key to display the “ON”.

Then press the

key.

Select the Automatic paper Selection (APS) mode

or Automatic Magnification Selection (AMS) mode.

Then select the desired paper cassette, reproduction

ratio, image density and copy quantity as required.

Place the originals on the original feed tray.

Press the

key.

10. COPYING MIXED SIZE ORIGINALS

Put original in doc. feeder

EDITING

:OFF

BUILD JOB

:OFF

MIX SIZE

:ON

A set of originals with different paper sizes can be copied together in the same operation, as long as the
originals all have the same width.

Note

This copy function requires the optional reversing automatic document feeder (RADF) be installed.

READY

EDITING

:OFF

BUILD JOB

:OFF

MIX SIZE

:OFF

MIXED SIZE ORIGINAL

OFF

Note

When the “MIX SIZE” is selected, the “APS” is automatically
selected.

Summary of Contents for e-studio 160






















































































































































































Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands

Toshiba e-studio 160, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands