Toshiba e-studio 160 Operator'S Manual For Copying Functions Download Page 55

Page: 55 / 182

4-3

1-Sided Originals > 1-Sided Copies (default setting)

This copy mode is selected as the default setting when the digital multi function system is turned on. To
change use the following procedures.

Press the

key on the control panel while in the

initial screen for copying.

• The “EDIT MENU” screen appears.

Select “1>1” by pressing the

key.

Then press the

key. Press the

key to return

to the initial screen for copying.

Tip

The menu that appears here varies depending on whether
the auto-duplexer unit (optional) and the reversing automatic
document feeder (optional) are installed or not.

Confirm that “DUPLEX” is highlighted on the screen.

Press the

key.

Press the

key.

Place the original(s) on the feed tray or on the glass.

Select the desired paper cassette, reproduction ratio,

image density and copy quantity.

READY

DUPLEX

:1 > 1

DUAL PAGE

:OFF

IMAGE SHIFT

:OFF

DUPLEX

Original > Copy

1 > 1

1 > 2

Summary of Contents for e-studio 160






















































































































































































Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands

Toshiba e-studio 160, Operator'S Manual For Copying Functions

Search results

Summary of Contents for e-studio 160

Reviews:

Related manuals for e-studio 160

Brands by name

Popular brands