Toshiba e-studio 16 Operator'S Manual Download Page 93

Page: 93 / 207

3-29

To select “4. END,” press

• Set the end date using

key.

• The end time is automatically calculated and displayed after

pressing the

key.

To select “2.ENTER TEL NUMBER(S)”, press

• Enter the number of the remote FAX. (

See pages 2-16

to 2-21.)

To select “7. SECURITY,” press

• Set the 4-digit security code if necessary.

PROG.CONT.POLL.

END DATE

FRI

PROG.CONT.POLL.

SECURITY CODE

PROG.CONT.POLL.

ENTER TEL NUMBER OR,

PRESS SPEED DIAL KEY

OR ONE TOUCH KEY

PROG. CONT. POLL.

1.ADD NEXT NUMBER

2.COMPLETE

When all the addresses are entered, select

“2.COMPLETE”. To enter the next remote FAX

address, select “1.ADD NEXT NUMBER” and return

to step 8.

• The procedure is now complete. The display returns to the

Standby Mode. The facsimile will automatically start polling
at the time set in this procedure.

Operation completed

JOB NUMBER :XXX

Summary of Contents for e-studio 16
















































































































































































































Search results

Summary of Contents for e-studio 16

Reviews:

Toshiba e-studio 16, Operator'S Manual, Page: 93 / 207

Search results

Summary of Contents for e-studio 16

Reviews: