Toshiba e-studio 16 Operator'S Manual Download Page 154

Page: 154 / 207

4-58

ENTERING & SETTING ITEMS

4. OUTPUTTING LISTS & REPORTS (Cont.)

Displaying the RELAY END REPORT Menu.

Press:

then

Select the desired option to send a Relay result

report to the Originator terminal when this facsimile

is the hub unit used in a relay transmission.

• To always send a report to the Originator, press

Go to Step 3.

• To only send a report when an error has occurred, press

. Go to Step 3.

• To turn OFF Automatic sending of the report, press

Select the option for first page image.

• To not send an image of the facsimile document, press

• To send an image of the facsimile document, press

Displaying the RECEPTION LIST Menu.

Press:

then

Select the Job type for Reception List printing.

• To select the Local Mailbox, press

• To select the Remote Mailbox, press

• To select the Relay, press

Select ON or OFF for the Reception List.

• To select “1.OFF,” press

• To select “2.ON,” press

RELAY END REPORT

1.ALWAYS

2.ON ERROR

3.OFF

PRINT 1st PG IMAGE?

1.OFF

2.ON

COMMUNICATION REPORT

05.RELAY ORIGINATORS REPORT

06.RELAY STATION REPORT

07.RELAY END REPORT

LOCAL MAILBOX LIST

1.OFF

2.ON

RECEPTION LIST

01.LOCAL MAILBOX LIST

02.REMOTE MAILBOX LIST

03.RELAY RECEPTION LIST

RECEPTION LIST

01.LOCAL MAILBOX LIST

02.REMOTE MAILBOX LIST

03.RELAY RECEPTION LIST

Relay Destination Report Setting

Reception List Setting

Summary of Contents for e-studio 16
















































































































































































































Search results

Summary of Contents for e-studio 16

Reviews:

Toshiba e-studio 16, Operator'S Manual, Page: 154 / 207

Search results

Summary of Contents for e-studio 16

Reviews: